Jet-tools JML-1014 Manuale Utente Scaricare il pdf (Pagina 10)

7. Insert the spindle into the spindle pulley

aligning the key.

8. Thread the handwheel onto the spindle

leaving a little space between the

handwheel and headstock. Tighten set

screws.

9. Center the spindle pulley and tighten set

screw.

10. Wrap the belt around the motor pulley

(lower). Be sure the belt is aligned with

spindle pulley and motor pulley.

11. Tension the belt and tighten the motor plate

lock handle.

Removing and Installing the Live Center

1. Loosen tailstock lock handle (B, Fig. 9).

2. Turn the tailstock handwheel (A, Fig. 9)

counter-clockwise until the live center (C,

Fig. 9) ejects from the spindle.

3. Before installing the live center into the

spindle, the spindle must be extended out

from the tailstock body far enough to allow

the live center to “seat” in the spindle.

1 2 ... 5 6 7 8 9 10 11 12

Commenti su questo manuale

Nessun commento