Jet-tools JDP-17FSE Manuale Utente Scaricare il pdf (Pagina 10)

10

Assembly

1. Place the base (A, Fig. 1) on a level floor.

2. With a 17mm wrench attach the column

assembly (B, Fig. 1) to the base (A, Fig. 1)

with four M10 x 40 hex cap bolts (C, Fig. 1).

Tighten firmly.

3. Thread lock handle (D, Fig. 2) into the table

bracket (E, Fig. 2).

4. Loosen the set screw (F, Fig. 3) on the

raising handle (G, Fig. 3) with a 3mm hex

wrench.

5. Slide the handle onto the table bracket

shaft.

6. Turn the handle until the set screw is

opposite the flat section on the shaft, and

tighten the set screw to secure the handle.

7. Insert the table (H, Fig. 3) into the table

bracket.

8. Tighten the table lock handle (I, Fig. 3).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Commenti su questo manuale

Nessun commento